The production methods of zirconia ceramic balls mainly include direct pyrolysis method, mold pressing method, reversed-phase suspension polymerization method, extrusion molding, isostatic pressure molding, titration molding, roll forming method, etc
Direct pyrolysis method: It is suitable for the preparation of zirconia ceramic pellets from the carbonate of the metal as raw material, which is environmentally friendly and simple, and is suitable for industrial large-scale production. The critical step is calcination, a thermal decomposition reaction that produces a large amount of gas that must be heated slowly.
Mold pressing method: a widely used molding method, the advantages are high production efficiency, easy automation, small shrinkage of product firing, and not easy to deform. The disadvantage is that the size of the zirconia ball is large and the spherical shape is not good.
Reversed-phase suspension polymerization method: a method of polymerization reaction by dispersing the monomer in the form of droplets in the suspension medium through mechanical stirring and dispersant. This method is suitable for the preparation of zirconia balls with high sphericity.
Extrusion: The strip blank is extruded by the vacuum mud refining device, and then cut into small sections through the blank cutting device, and the small sections are pressed and rolled into small balls, and the ball blanks are obtained after drying. This method is low-cost and simple, but produces products with low density, low strength, and poor wear resistance.
Isostatic press molding: Fill a spherical soft mold with powder, compress the mold with a liquid medium of uniform pressure, and then demold to obtain a spherical blank. The spherical billet produced by this method is uniform and dense, and the green billet strength is higher, but the equipment investment is large, and it is difficult to realize automation.
Titration molding: By controlling the surface tension of the suspended zirconium bead droplets in a dielectric, they naturally form a spherical shape. The zirconium beads produced by this method have high sphericity, smooth surface and excellent grinding performance, but the production speed is relatively slow and the cost is high.
Roll-forming method: Drawing on the production process of the Northern Lantern Festival, it is formed by spraying a binder liquid to wet the core, and then adding dry powder to the outside of the wet core, and then compacting by rolling action. This method equipment and process are relatively simple, less investment, high production efficiency, and can be produced continuously in large quantities.

