Introduction
High purity Monoclinic Zirconia Powder is an inorganic material with excellent properties and is widely used in various high-tech fields.
High purity Monoclinic Zirconia Powder refers to pure zirconia (ZrO2) that does not contain any dopants or additives and exhibits a monoclinic crystalline phase structure at temperatures up to 1170 ℃. Excellent nano ZrO2 powder should meet the following requirements: high purity, good stability, precise chemical composition and controllable phase, controllable morphology and single size, appropriately small particle size, good dispersibility and minimal agglomeration.
The preparation methods of nano ZrO2 powder can be roughly divided into three categories: gas-phase method, liquid-phase method, and solid-phase method. Among them, liquid phase method is widely used, including homogeneous coprecipitation method, sol gel method, hydrothermal method, template method, microemulsion method, etc.
Application Area:
1. Wear resistant and hardness enhancing coating, thermal insulation coating.
2. High strength and high toughness abrasive tools: grinding mill liners, cutting tools, drawing dies, hot extrusion dies, nozzles, balls, pump parts, various sliding components, etc.
3. Additives for functional ceramics, structural ceramics, electronic ceramics, and bioceramics
4. Artificial gemstones and grinding materials.
5. Refractory material additives.
6. MLCC capacitor ceramic powder raw materials, additives for piezoelectric components, oxygen sensitive resistors, and large capacity capacitors.
7. Additives for battery raw materials such as lithium battery materials and solid oxide fuel cells (SOFCs).
8. Oxygen sensor, NOX sensor.
9. Vehicle exhaust catalyst carrier.
10. High hardness zirconium beads and crushed ball raw materials.
11.3D Printing Materials.
Technical Parameters
|
Models |
ZR-100 |
ZR-200 |
ZR-300 |
|
Appearance |
White powder |
||
|
SSA(m2/g) |
14-16 |
30-36 |
60-90 |
|
Particle Size(D50 μm) |
0.8-1.1 |
0.9-1.1 |
0.3-0.4 |
|
Moisture(wt%) |
＜0.7 |
＜0.6 |
＜0.8 |
|
Bulk Density(g/cm3) |
＜0.55 |
＜0.4 |
＜0.35 |
|
Main Content(%) |
99.85 |
99.9 |
99.9 |
Hot Tags: monoclinic zirconia powder, China monoclinic zirconia powder manufacturers, suppliers, factory, gain ultrafine particle size, zirconium oxide powder for phone, High Purity Zirconia Beads, zirconia powder sale, Zirconia Sandblasting Beads, Zirconia Ceramic Sand
