Introduction

The zirconium silicate ceramic sand is made from zirconium sand, melting and blending in the high temperature mine heat furnace, then made to micro beads by special technology, its features are high hardness, good elasticity, high gloss, high impact strength, no dust, and can be recycled multiple times. It is mainly used for sandblasting and shot blasting treatment on metal surfaces. It is a durable and environmentally friendly sandblasting and shot blasting media.

Application

1) 3C products - Sandblasting Finishing

Alloy shell, middle frame and built-in parts of computers, mobile phones, cameras, etc. - sandblasting finishing

Clean burrs to form film-light decorative or fine reflective surface, on alloy workpiece such as mobile phone to achieve different reflection or matte.

2) Aerospace industry-Shot Peening

Suitable for aerospace engine components, aircraft landing gear, gear transmissions, aero-engine blades, aircraft wing-shot peening

3) Automotive industry-Sandblasting reinforcement/ Shot Peening

Suitable for gearbox gears, automotive aluminum hubs, piston components/shock absorbers, engine crankshaft sandblasting reinforcement/shot peening

4) Kitchen Industry-Sandblasting finishing

Stainless steel cutlery and kitchen utensils sandblasting finishing

5) Machinery, Medical Instrument - Sandblast finishing/shot peening

The overall sandblasting and polishing, finishing, restore the natural color of the metal, enhance the visual effect and texture, and also shot peening reinforcement to improve its worklife.

6) Casting and forging parts, welded parts, heat-treated parts - Sandblast Cleaning

Clean all the dirt on the surface of the alloy workpiece, micro burrs, improve the flatness and smoothness of the workpiece, and expose to uniform metallic color, achieving smooth and non-reflective requirements on surface.

7) Pipeline - Sandblast Cleaning

Metal pipes such as copper pipes and steel pipes are cleaned and polished on the inner and outer walls.

8) Molds - Sandblast cleaning

Cleaning of molds of glass bottles, tires, etc., rust, dirt and impurities.

9) Electroplating, painting, anode-Surface Pretreatment

Electroplating, painting, anode, Teflon, rubber, plastic, traversing, metal, spray welding, gold plating, titanium plating, etc., to remove dirt and increase product surface adhesion.

10) Hardware parts - Sandblasting to improve lubrication conditions

It can produce uniform and fine uneven surface on the surface of the part, so that the lubricating oil can be stored, improve the lubrication condition and reduce the noise.